Shopping for a leg press hack squat combo under $1,000 puts you in a band of the market where two RitFit 45 degree machines compete, and the RitFit BLP01 45 Degree 3-In-1 machine is the lower priced of the two at $799.99.
This guide prices the whole RitFit line against that line, so you can see what 1200 lb of capacity, 20.3 sq ft of floor, and a 3 year frame warranty really cover, and what the machines above the line cost.
Quick Answer: The RitFit BLP01 is the best value answer to a leg press hack squat combo under $1,000 because it lists at $799.99 while still rating to a 1200 lb capacity and covering only 20.3 sq ft of floor. The RitFit Gazelle stays inside the same line at $969.99, while the next step up adds 300 lb to 800 lb of static load for $600 more.
Key Takeaways
- Price line: the RitFit BLP01 lists at $799.99 and the RitFit Gazelle at $969.99, so two 45 degree machines sit inside the $1,000 line, and the Black, Red, and Pink BLP01 versions all carry the same price.
- Capacity: 1200 lb of rated load with a 572 lb dynamic rating, on a 2 inch plate hole that accepts both Olympic and standard plates.
- Footprint: 20.3 sq ft of floor and a 55.9 inch frame, the smallest and lowest of the three RitFit 45 degree machines.
- What the next step costs: the second machine in the line adds 300 lb of static load and a longer travel path for $170 more while still ending under $1,000, and the top of the line adds 800 lb for $600 more.
- Warranty: RitFit covers strength equipment for 3 years on the frame and welding and 1 year on bushings and bearings.
What Does $1,000 Actually Cover in a 45 Degree Leg Press Hack Squat Combo?
A $1,000 ceiling covers a plate loaded 45 degree leg press and hack squat combo with 1200 lb to 1500 lb of frame capacity and 20 to 26 sq ft of floor space.[1] That is enough machine for most home lifters, because the sled angle and the footplate do the work that a heavier frame would otherwise do. The RitFit line makes the threshold easy to read, since each step up adds capacity and floor space together.
The practical effect of the $1,000 line is that you get a complete leg press, hack squat, and calf raise station without a weight stack, so your own plates do the loading. That keeps the price down but moves part of the cost to the plates you already own or still need to buy.
- Frame capacity: around 1200 lb of rated load, which suits lifters who train legs two or three times a week and press in the mid range of the sled.
- Steel spec: roughly 12 gauge tubing, about 0.098 inches thick, on the BLP01 frame according to RitFit's own comparison table.
- Adjustability: a 45 degree sled with a hack squat footboard and a separate leg press footboard, so one machine covers two movement patterns plus calf work.
- Plates: a plate loaded sled means plates are not part of the price, which is the single biggest hidden cost at this end of the market.
- Height: a frame around 56 inches tall, low enough for basements where a taller machine would hit the ceiling.
You can browse the full leg press machine collection to see which 45 degree options sit under the line.
"Love the hack squat/leg press combo. It is the perfect complement to my BPC06 and leg curl/extension machine. RitFit really gets the job done right!"
Westley W. Verified Buyer, RitFit BLP01 3-in-1 Leg Press and Hack Squat Machine
Is the RitFit BLP01 Leg Press and Hack Squat Machine the Best Combo Under $1,000?
The RitFit BLP01 is the value pick inside the $1,000 line because it combines a 1200 lb rating, a 20.3 sq ft footprint, and a $799.99 price in one 45 degree machine. Its overall rating sits at 4.8 out of 5 from 366 reviews on the RitFit product page, which is the kind of proof a first time buyer can actually check.
Two limits decide whether it is the right buy for you. The 1200 lb figure is the frame ceiling rather than a target load, and the sled is plate loaded, so the plates are not included in the $799.99 price.
- Value: at $799.99 the BLP01 costs $170 less than the next machine in the RitFit line and $600 less than the model at the top of it.
- Build: a 2 inch plate hole accepts Olympic and standard plates, so an existing plate collection works immediately.
- Adjustment: 5 positions on the hack squat footboard and 3 on the leg press footboard, with tool free mode changes in under a minute.
- Color: Black, Red, and the BLP01 in Pink all list at the same $799.99, so the finish is not an upcharge.
- Support: 3 years of frame and welding coverage, which is the longest term RitFit publishes for strength equipment.
If your training stays inside those limits, paying more buys capacity you may never use. If you plan to chase heavy single leg work or you are taller than 6.4 ft, the honest answer is to keep saving.
"For the money, especially when it is discounted, the RitFit BLP01 does what it is supposed to do: it gives you a smooth, functional leg press and hack squat setup that most home gym lifters can actually afford."
Michael Tabers, Equipment Reviewer, The Jungle Gym Reviews, RitFit BLP01 Review: Best Budget Leg Press/Hack Squat?
"This is a well constructed leg press/ hack sqwat machine. It was easy to assemble and works perfectly!"
Nate W. Verified Buyer, RitFit BLP01 3-in-1 Leg Press and Hack Squat Machine
What Is Inside the $1,000 Line, and What the Step Above Costs?
A $1,000 budget covers two RitFit 45 degree machines instead of one. The RitFit Gazelle 3-in-1 leg press hack squat machine lists at $969.99 and sits inside the line next to the BLP01, while the RitFit Gazelle Pro is the only step that goes above it.[2]
| Feature | RitFit BLP01 | RitFit Gazelle | RitFit Gazelle Pro |
|---|---|---|---|
| Listed price | $799.99 | $969.99, regular $999.99 | $1,399.99, regular $1,459.99 |
| Weight capacity | 1200 lb | 1500 lb static | 2000 lb static |
| Dynamic capacity | 572 lb | 900 lb | 1300 lb |
| Footprint | 20.3 sq ft | 25.9 sq ft | 28.93 sq ft |
| Frame height | 55.9 inches | 70.9 inches | 57.8 inches |
| Frame material | about 12 gauge steel | about 14 gauge steel | about 11 gauge steel |
| Ideal user height | 5.3 ft to 6.4 ft | 4.6 ft to 6.9 ft | 4.9 ft to 6.8 ft |
| Counterweight rods | 1 pair | 2 pairs | 2 pairs |
Sources: RitFit product pages for the BLP01, Gazelle, and Gazelle Pro, plus RitFit's comparison table on the BLP01 page. Prices checked September 2026.
What the Second Machine Inside the Line Adds
The RitFit Gazelle lists at $969.99, which is $170 more than the BLP01 and still inside the $1,000 line. For that step it raises static load to 1500 lb, footprint to 25.9 sq ft, and travel path to 40.6 inches, so the trade is 300 lb of extra static load and 5.6 sq ft of extra floor for a lifter who wants a longer press stroke rather than the smallest possible machine.
What the Flagship Machine Adds Above the $1,000 Line
The Gazelle Pro is the only machine that goes above the line. At $1,399.99 it costs $600 more than the BLP01 and answers the capacity question directly with a 2000 lb static rating, a 1300 lb dynamic rating, a 2x3 inch frame, and two sets of band pegs for added resistance.[3]
What the 45 Degree Frame Supports, and Where It Stops
The BLP01 frame supports a 1200 lb plate load and a 572 lb dynamic load, which covers home leg press and hack squat training but not near maximal loading. Those two numbers are the boundary of the machine, not a suggestion about how much you should lift.
Everything else about the machine is sized for a garage gym rather than a commercial floor. The figures below come from the RitFit product page and the user manual dimensions.
- Overall size: 75.6 inches long, 40.6 inches wide, and 55.9 inches tall.
- Footprint: 20.3 sq ft, so one garage bay or a basement corner holds it with room to load plates.
- Headroom: the frame tops out at 55.9 inches, well under a standard basement joist height, which is unusual for a 45 degree sled.
- Footplates: the lower footplate measures 23.07 by 26.77 inches with 5 adjustable positions, and the upper footplate measures 18.31 by 14.17 inches with 3 positions.
- Plate compatibility: a 2 inch plate hole diameter takes both Olympic and standard plates.
- Ideal user height: RitFit lists a 5.3 ft to 6.4 ft range, which is narrower than the taller machine above it.
- Pull force: an unloaded pull force of 55 lb, a figure that describes how much the empty sled resists before you add a plate.
Anyone pressing close to the frame ceiling, or standing taller than 6.4 ft, should treat the BLP01 as the wrong fit instead of a machine to grow into. For everyone else, the limited range is what keeps the price under the line.
Which Leg Day Goals Fit Inside One Machine?
One 45 degree machine covers leg press, hack squat, reverse hack squat with proper setup, and calf raises, which is a complete lower body session. RitFit lists all four movement patterns for the BLP01, and the two adjustable footplates are what make them fit different body proportions.
Each pattern has its own setup, and the tool free switch means you can rotate through them in a single session without leaving the machine.
- Leg press: feet on the upper footplate with 3 adjustment positions, an easy entry point for building quads and glutes with sets of 10 to 15 reps.
- Hack squat: back against the pad with feet on the lower footboard, where the 5 positions let you set how deep the sled travels for quad focused work.
- Reverse hack squat: the same footboard with a reversed stance, which shifts emphasis toward the glutes and hamstrings when your setup allows it.
- Calf raise: the footplate edge works as a calf raise platform, so calves train on the same machine instead of a separate station.
- Transitions: changing between leg press and hack squat takes under a minute and needs no tools, which matters when you superset the two patterns.
The how to use a leg press hack squat machine guide covers the setup positions in detail, and the leg machines range shows what pairs with it in a small gym.
Durability, Warranty, and the Real Cost of Upgrading Later
RitFit's published warranty schedule covers strength equipment for 3 years on the frame and welding and 1 year on bushings and bearings, starting from the order date.[4] That schedule is the long term durability answer for the BLP01, and it is the term to weigh before paying more for a heavier frame.
The frame itself is built for plate loaded home training rather than commercial volume, and the wear items are the parts RitFit schedules separate coverage for.
- Frame and welding: 3 years of coverage on both, the longest term in the RitFit strength schedule.
- Bushings and bearings: 1 year, with a monthly check of bolts, connections, and support pads recommended to keep the glide smooth.
- Steel: roughly 12 gauge tubing at about 0.098 inches, one step below the frame at the top of the RitFit line.
- Operation: roller bearings on precision rails keep the sled quiet enough for a house, and an unloaded pull force of 55 lb means the empty carriage still moves smoothly.
- Delivery: the machine ships in three boxes, so plan a two person unload rather than a solo driveway job.
- Coverage limits: warranty coverage runs from the order date, is not transferable, and does not apply outside the lower 48 states.
Upgrading later is usually cheaper as accessories than as a second frame, because the sled itself does not change. The BLP01 and PLC01 leg extension and curl set adds seated leg extension and curl work without a new machine.
For a fuller build, the M1 Pro Smith machine with cable crossover and BLP01 package covers upper body training on the same order.
Who Should Buy Under $1,000, and Who Should Save Longer
The RitFit BLP01 fits lifters between 5.3 ft and 6.4 ft tall who press inside 1200 lb and train in a low basement or a single garage bay. The table below matches a training profile to one machine in the RitFit line, so the price decision follows from your space and your loading rather than from the spec sheet alone.
| Your situation | Machine to choose | Why it fits |
|---|---|---|
| Low basement or single garage bay with tight headroom | RitFit BLP01 | A 55.9 inch frame and a 20.3 sq ft footprint, the lowest and smallest of the three |
| A shared household pressing inside 1200 lb | RitFit BLP01 | 5 hack squat and 3 leg press footplate positions to fit different lifters |
| Chasing a longer press stroke with heavier plates | RitFit Gazelle | A 1500 lb static rating and a 40.6 inch travel path for $170 more |
| Wanting band resistance and the highest rated frame | RitFit Gazelle Pro | A 2000 lb static rating, a 2x3 inch frame, and two sets of band pegs |
Sources: RitFit product pages for the BLP01, Gazelle, and Gazelle Pro. Prices checked September 2026.
For the first two rows, the $799.99 price is the whole argument, because the extra capacity above it is capacity you would pay for and rarely use. Step to the third row if you want a longer stroke without leaving the line, and save longer only if your loading or your depth needs land in the fourth.
FAQs About Leg Press Hack Squat Combos Under $1,000
Is a leg press hack squat combo under $1,000 worth buying?
Yes, if your training fits inside the machine's rated limits. The RitFit BLP01 lists at $799.99 and rates to a 1200 lb weight capacity, so it covers most home lifters who train legs two or three times a week. The RitFit Gazelle also stays inside the same $1,000 line at $969.99 and raises the static rating to 1500 lb, so you only need to go above the line if you plan to load close to a 2000 lb frame ceiling.
How much weight can the RitFit BLP01 hold?
The RitFit BLP01 is rated to a 1200 lb weight capacity with a 572 lb overall dynamic capacity, and its plate hole diameter is 2 inches. It accepts both Olympic and standard plates, so your existing plates work. The 572 lb dynamic figure is the more useful number when you load the sled for heavy leg press sets.
What is the difference between the BLP01 and the Gazelle?
The RitFit Gazelle lists at $969.99 and raises the static load to 1500 lb and the footprint to 25.9 sq ft. The BLP01 stays at 20.3 sq ft with a 1200 lb rating. The Gazelle also runs a taller 70.9 inch frame and adds a 40.6 inch travel path, so it rewards lifters who want more depth rather than the smallest possible footprint.
Does the RitFit BLP01 include weight plates?
No, the RitFit BLP01 is a plate loaded machine, so weight plates are not part of the $799.99 price. You supply your own Olympic or standard plates on the 2 inch plate hole diameter, and the machine also includes plate storage. Plan for plates separately if you are starting from an empty garage.
How much space does the BLP01 need?
The RitFit BLP01 covers a 20.3 sq ft footprint and stands 55.9 inches tall, with an overall length of 75.6 inches and a width of 40.6 inches. RitFit lists an ideal user height range of 5.3 ft to 6.4 ft. The low frame height makes it one of the few 45 degree machines that fits a low basement.
What is the warranty on the RitFit BLP01?
RitFit's published warranty schedule covers strength equipment with a 3 year frame warranty, 3 year welding coverage, and 1 year on bushings and bearings, starting from the order date and non-transferable. That schedule applies to the BLP01 frame and guide rails, which is the longest coverage in the RitFit strength lineup.
Conclusion
A leg press hack squat combo under $1,000 comes down to how much frame you actually need, and the RitFit BLP01 answers that at $799.99 with a 1200 lb rating and a 20.3 sq ft footprint. The RitFit Gazelle fills the rest of the band at $969.99 with 1500 lb of static load and a 25.9 sq ft footprint.
Buy it if you train legs at home, stand under 6.4 ft, and press inside 1200 lb. Save longer only if your loading or your press depth needs the machine above the line. Check the RitFit discount guide before you order.
Disclaimer
This article covers equipment specifications and buying considerations for home gym leg press machines, and it is not medical or rehabilitation advice. Consult a qualified professional before starting a new strength training program, especially if you have a knee, hip, or back condition.
References
1. RitFit Sports. RitFit BLP01 45 Degree 3-In-1 Leg Press Hack Squat and Calf Raise Machine product page. Accessed September 23, 2026.
2. RitFit Sports. RitFit Gazelle 3-in-1 Leg Press Hack Squat Machine for Home Gym product page. Accessed September 23, 2026.
3. RitFit Sports. RitFit Gazelle Pro 3-In-1 Leg Press and Hack Squat Machine product page. Accessed September 23, 2026.
4. RitFit Sports. Return and Warranty Policy. Accessed September 23, 2026.
