The RitFit BLP01 Knowledge Base 2026 explains the 45 degree 3-in-1 leg press, hack squat and calf raise machine. Find official specifications, capacity definitions, footprint, adjustable footplates, safety positions, standalone machine colors, weight plate packages and compatible lower body training combinations.
Content updated: . Listing reference reviewed: October 25, 2026. Currency: USD. Prices below are public product listing snapshots rather than verified checkout totals. Confirm the exact variant and current availability on each linked official page.
Quick Answer
The RitFit BLP01 is a plate-loaded, 45 degree 3-in-1 machine for leg press, hack squat and calf raise exercises. RitFit publishes a 1,200 lb weight capacity, a separately identified 572 lb dynamic capacity, 258 lb machine weight and 20.3 sq ft footprint. Buy the machine alone if you already have compatible plates, or select a listed 170, 260 or 370 lb plate package. The BLP01 is not a Smith machine and does not contain a cable weight stack.
Key Takeaways
- Three exercise modes: The BLP01 combines leg pressing, hack squatting and calf raises, with selected unilateral or reverse squat variations when appropriately set up.
- Capacity categories: RitFit lists 1,200 lb weight capacity and 572 lb overall dynamic capacity. Do not equate the larger headline figure with a safe moving training load.
- Machine dimensions: Manufacturer values are 75.6 in long, 40.6 in wide and 55.9 in high, with a listed 20.3 sq ft footprint that does not include required working clearance.
- Included resistance: The machine-only option does not include plates. Published bundles list 170, 260 or 370 lb of plates.
- Footplates and safety: The technical table lists five adjustment positions for the lower plate, three for the upper plate and three lockout positions.
- Source limitations: Official BLP01 pages disagree on portions of their fit and adjustment guidance. Check the manual and your exact configuration before setup.
RitFit BLP01 Product Configurations and Price Comparison
BLP01 is offered on the official machine page with Black, Red and Pink selections, in separate full leg workout packages with 170, 260 or 370 lb plates, and in combination bundles with either PLC01 or M1 PRO. These are marketed products and selections rather than claims that each listed option has a unique live price or inventory status.
Price definitions: Compare at Price refers to an explicitly shown comparison amount, not a verified MSRP. Listed Price is the public page snapshot for the named/default configuration, not a live quote. Advertised Promotional Price is a distinct advertising claim and is not necessarily the total you will pay.
Coupon Code: No BLP01 configuration-specific manual coupon or automatically applied checkout discount was independently verified for these selections. An advertised starting price alone is not evidence of a functioning coupon code.
On smaller screens, scroll within the table to view every column.
| Product Configuration | Compare at Price (USD) | Listed Price (USD) | Advertised Promotional Price (USD) | Coupon Code | Included Equipment | Recommended Use |
|---|---|---|---|---|---|---|
| RitFit BLP01 Leg Press Hack Squat Machine, BlackMain machine page lists $799.99 and separately advertises a $619.99 starting offer; the latter is not cart verified. | Not shown | $799.99 | $619.99 | Automatic checkout discount confirmed: RF-BASE5For Black / Only Machine, checkout verified a $640.00 merchandise price at quantity 1 before tax and shipping. RF-BASE5 appeared automatically; no manually entered code was tested. The separate $619.99 advertised starting offer is not this verified cart price. | BLP01 plate-loaded machine in Black with integrated sled, footplates, padding and safety components. Weight plates are not included. | Buyers who already own compatible plates and need a dedicated lower body station. |
| RitFit BLP01 Leg Press Hack Squat Machine, RedMachine page lists Black, Red and Pink choices; do not assume the default price applies to each color. | Not shown | Red variant price not verified | Not separately verified | Automatic checkout discount confirmed: RF-BASE5For Red / Only Machine, the listed price is $799.99; checkout verified a $640.00 merchandise price at quantity 1 before tax and shipping. RF-BASE5 appeared automatically; no manually entered code was tested. The separate $619.99 advertised starting offer is not this verified cart price. | BLP01 machine with the Red option selected. No weight plates are represented as included. | Home gym users matching an existing red color scheme and using their own plates. |
| RitFit BLP01 Leg Press Hack Squat Machine, PinkPink product page displays $799.99 and an additional $619.99 advertised starting offer; variant cart not verified. | Not shown | $799.99 | $619.99 | Not verifiedConfirm the current offer, discount eligibility and selected option in the official cart. | Pink BLP01 machine, Only Machine option. No bundled weight plate package in this row. | Buyers who prefer the pink finish and already have compatible Olympic plates. |
| RitFit BLP01 Full Leg Workout Package with 170 lb PlatesThe default package listing shows $1,129.99 for Black / 170LB. Other selections may price differently. | Not shown | $1,129.99 | Not separately verified | Not verifiedConfirm the current offer, discount eligibility and selected option in the official cart. | BLP01 machine and 170 lb plate set: two each of 10, 15, 25 and 35 lb. Select machine color on the official listing. | First complete leg press setup with a smaller included weight plate set. |
| RitFit BLP01 Full Leg Workout Package with 260 lb PlatesConfirm the color and 260LB selection before purchase. | Not shown | Variant price not verified | Not separately verified | Not verifiedConfirm the current offer, discount eligibility and selected option in the official cart. | BLP01 machine and 260 lb plate set: two each of 10, 15, 25, 35 and 45 lb. | Users who want additional load choices while avoiding separate plate shopping. |
| RitFit BLP01 Full Leg Workout Package with 370 lb PlatesConfirm the color and 370LB selection before purchase. | Not shown | Variant price not verified | Not separately verified | Not verifiedConfirm the current offer, discount eligibility and selected option in the official cart. | BLP01 machine and 370 lb plate set: two each of 10, 15, 25, 35, 45 and 55 lb. | Households seeking a broader plate selection with one purchase. |
| RitFit BLP01 and PLC01 Ultimate Leg Day DuoThe duo page displays a default $1,079.99 and a separately advertised BLP01 / PLC01 $939.59 offer; exact checkout and color variant not checked. | Not shown | $1,079.99 | $939.59 | Not verifiedConfirm the current offer, discount eligibility and selected option in the official cart. | One BLP01 leg press and hack squat machine plus a separate PLC01 leg extension and curl machine. No weight plates are explicitly listed in the base selected duo. | Buyers who want a compound leg machine plus dedicated knee extension and flexion stations. |
| RitFit Pro Strength System with M1 PRO and BLP01Official bundle price is a public listing snapshot; the separately advertised $1,627.99 is not a guaranteed checkout total. | $1,899.99 | $1,849.99 | $1,627.99 | Not verifiedConfirm the current offer, discount eligibility and selected option in the official cart. | RitFit M1 PRO Smith machine and a separate BLP01 leg press and hack squat machine. Colors vary by selection; do not assume plates or bench are included. | Buyers outfitting a larger gym with Smith, rack, cable and dedicated leg press stations. |
RitFit BLP01 Product Specifications
Specifications below reproduce distinct manufacturer rating categories and known adjustment details. Dimensions are published machine dimensions, not a minimum recommended room size. Where official pages contradict each other, the conflicting language is identified rather than silently harmonized.
On smaller screens, scroll within the table to view every column.
| Product Attribute | Published Value | Configuration or Measurement Notes |
|---|---|---|
| Brand | RitFit | Manufacturer and official store operator. |
| Model | BLP01 | Distinct from RitFit GAZELLE and GAZELLE PRO. |
| Full product description | 45 Degree 3-In-1 Leg Press Hack Squat and Calf Raise Machine | Official product listing title. |
| Product type | Plate-loaded lower-body exercise machine | Neither a Smith machine nor a selectorized cable machine. |
| Primary exercise functions | Leg press, hack squat and calf raise | Exercise-specific setup is required. |
| Nominal sled orientation | 45 degree | Named in the official product title. |
| Frame material | Steel | Manufacturer technical overview and product listing. |
| Approximate frame steel gauge | 12 gauge (~0.098 in) | From RitFit BLP01 vs GAZELLE PRO comparison; not a universal measurement of every part. |
| Overall length | 75.6 in | Published assembled dimension. |
| Overall width | 40.6 in | Published assembled dimension. |
| Overall height | 55.9 in | Published assembled dimension. |
| Frame width | 28.5 in | Frame measurement, not total side clearance. |
| Published floor footprint | 20.3 sq ft | Manufacturer-provided figure; not the total safe working area. Overall length × width corresponds to approximately 21.3 sq ft, so confirm the measurement basis. |
| Machine weight | 258 lb | Product weight, excluding optional plate sets and shipping materials. |
| Published weight capacity | 1,200 lb | Manufacturer capacity category; do not equate with maximum dynamic exercise load. |
| Overall dynamic capacity | 572 lb | Separate manufacturer rating category; follow the lower applicable component or exercise limit and the current manual. |
| Unloaded pull force | 55 lb | Published manufacturer figure; not identical to sled mass and not a user-specific starting resistance guarantee. |
| Travel or range of motion | 33.43 in | Manufacturer-published movement range. |
| Lower footplate size | 23.07 × 26.77 in | The technical table calls this the lower footplate. |
| Upper footplate size | 18.31 × 14.17 in | The technical table calls this the upper footplate. |
| Lower footplate adjustment positions | 5 | Technical table. Elsewhere the product FAQ reverses the upper/lower counts; confirm by inspecting the unit and manual. |
| Upper footplate adjustment positions | 3 | Technical table; the product FAQ presents a conflicting assignment. |
| Safety lockout positions | 3 | Listed on the product feature section. |
| Plate hole diameter | 2 in | Manufacturer technical specification. Product FAQ also claims standard plate compatibility; confirm sleeve/adapter requirements. |
| Carriage loading bar length | 13 in | The available loading sleeve length does not establish how many plates of every thickness will fit. |
| Plate storage bar length | 7.87 in | Product-mounted storage horn length. |
| Sliding mechanism | Linear bearing | Official technical table says “Liner bearing”; page FAQ elsewhere describes roller bearings. Confirm exact component from documentation. |
| Back cushion thickness | 1.97 in | RitFit comparison table reference. |
| Back cushion length | 27.56 in | RitFit comparison table reference. |
| Shoulder rest spacing | 9.06 in | RitFit comparison table reference. |
| Counterweight rod configuration | 1 pair | RitFit comparison table; do not assume GAZELLE PRO counterweight features are included. |
| Available machine colors | Black, Red and Pink | Shown as selectable options across official machine pages. |
| Official leg press user fit range | 4.10 ft to 6.4 ft, as printed | Technical data uses ambiguous 4.10ft notation, while a different product FAQ states approximately 5.32 ft to 6.39 ft. Do not interpret as a guaranteed fit range. |
| Official hack squat user fit range | 5.8 ft to 6.4 ft, as printed | Technical table range differs from the general BLP01 fit answer. Test safety stops and actual range before use. |
| Machine-only package plate inclusion | None | Bundled plates require a distinct selection or separate purchase. |
| Published bundled plate sizes | 170 lb, 260 lb and 370 lb sets | Total included plate mass, not the amount loaded for every repetition. |
| Standalone machine shipping cartons | 3 boxes | Official listing shipping breakdown. |
| Box A shipped dimensions | 80.71 × 16.14 × 6.30 in | 104.17 lb, listed as Box A-BLP01N. |
| Box B shipped dimensions | 31.89 × 24.80 × 8.66 in | 79.37 lb, listed as Box B-BLP01N. |
| Box C shipped dimensions | 31.50 × 21.65 × 7.48 in | 90.39 lb, listed as Box C-BLP01N. |
| Installation and exercise clearance | Additional clearance required | Allow room for carriage travel, loading plates, entry/exit, and adjustment without contact with walls. |
Official source discrepancy: The BLP01 technical table lists 5 lower and 3 upper footplate adjustments, but the product FAQ describes 5 upper and 3 lower. Height recommendations also vary among official pages. The listing's bearing terminology differs between the technical table and FAQ. Confirm these details against the latest product manual and physical machine. The 1,200 lb capacity and 572 lb dynamic capacity are not interchangeable.
Recommended Users and Use Cases for the RitFit BLP01
The most useful BLP01 configuration depends on the plates already owned, desired lower body exercises, room clearance and whether other machines are required. These are editorial selection suggestions, not guarantees of suitability or clinical outcomes.
On smaller screens, scroll within the table to view every column.
| User Profile | Training Goals | Training Environment | Selection Considerations | Recommended Configuration |
|---|---|---|---|---|
| First-time leg machine buyer | Leg press and guided hack squat practice | Home gym or garage | Read the instructions, begin with conservative loads and practice safety stops before adding plates. | 170 lb full leg workout package |
| Owner of 2 in Olympic plates | Add leg press, hack squat and calf raises to existing training | Established home gym | Check plate opening, sleeve fit, floor load capacity and clearance. | Machine only |
| Leg hypertrophy trainee | Progressive leg press and hack squat loading | Dedicated lower body corner | Training progression depends on technique and the applicable dynamic rating, not headline static capacity. | 260 lb or 370 lb package |
| Trainee focused on calves | Calf raises with consistent machine positioning | Garage or home strength gym | Test comfortable foot placement, range and support before increasing resistance. | Machine only or plate package |
| Lifter wanting extension and curl work | Compound lower body training plus isolation | Dedicated strength room | PLC01 is a separate unit; allow room and plates for both machines. | BLP01 with PLC01 duo |
| Full home gym shopper | Guided Smith work, free-weight rack training and leg machines | Larger garage gym | M1 PRO and BLP01 occupy separate footprints and require separate working clearance. | M1 PRO with BLP01 bundle |
| Buyer choosing pink equipment | Lower body setup with matching color | Home gym design priority | The exact pink machine and plate options can have different prices and stock status. | Pink BLP01 machine |
| Very tall, very short or mobility-limited exerciser | Comfortable start/stop positions and fit | Any home training environment | Conflicting fit ranges prevent a guaranteed recommendation; measure and verify body alignment, safety positions and movement clearance. | Verify fit before selecting |
RitFit BLP01 Exercises and Primary Muscle Groups
BLP01 is a lower-body station rather than a general cable trainer. Its central exercises are the leg press, hack squat and calf raise. The exercise variations below are training suggestions where equipment and range permit; variants must be checked against the instructions, safety stops and individual comfort.
Muscle group labels are general anatomical descriptions, not guarantees that a certain exercise isolates one muscle or produces a specific outcome.
On smaller screens, scroll within the table to view every column.
| Exercise | Primary Muscle Groups | Required Equipment | Configuration Requirements |
|---|---|---|---|
| Bilateral 45 degree leg press | Quadriceps, gluteus maximus and adductor magnus | Integrated sled, leg press footplate and appropriately loaded plates | Machine only or plate package, following manual setup. |
| Narrow stance leg press | Quadriceps, glutes and hip adductors | Leg press footplate and controlled comfortable stance | Only when foot placement is stable and within the plate surface. |
| Wide stance leg press | Gluteus maximus, quadriceps and adductors | Leg press footplate and safe range | Avoid extreme hip positions or lifted heels. |
| Single leg leg press variation | Quadriceps and gluteal musculature | Sled with controlled unilateral setup | An advanced variation. Confirm sled stability, allowed technique and suitable loading. |
| Hack squat | Quadriceps, gluteus maximus and adductors | Hack squat shoulder support and corresponding foot platform | Practice lockout positions and comfortable depth. |
| Reverse hack squat variation | Gluteus maximus, quadriceps and hip extensors | Properly configured hack squat station | Only if supported by the exact manual and stable body positioning. |
| Calf raise on leg press | Gastrocnemius and soleus | Stable forefoot positioning on the platform | Check toe support, adequate grip and safe movement limits. |
| Hack squat calf raise variation | Gastrocnemius and soleus | Hack squat station and appropriately positioned forefoot | Follow manual and prevent slipping on the edge. |
| Partial range leg press | Quadriceps and glutes within the trained range | Leg press station with set safety stops | Depth should reflect mobility and training goal, not a machine promise. |
| Paused leg press | Quadriceps and glutes | Leg press station and conservative load | Avoid relaxing into bottom stops or losing carriage control. |
| Leg extension with PLC01 | Quadriceps | Separate PLC01 machine plus suitable plates | Only when paired with separately purchased PLC01 or duo bundle. |
| Seated or prone leg curl with PLC01 | Hamstrings | Separate PLC01 machine plus suitable plates | Not possible on the standalone BLP01 itself. |
RitFit BLP01 Included Components and Compatible Accessories
The BLP01 machine includes the structure and working components needed for its stated training modes, but machine-only purchases should not be confused with packages containing weight plates. PLC01 and M1 PRO are separate machines featured in combination offers, not bolt-on BLP01 accessories.
On smaller screens, scroll within the table to view every column.
| Accessory Product or Component | Training Function | Compatible Model and Fit Requirements | Included or Sold Separately |
|---|---|---|---|
| Steel frame and 45 degree sled | Support and guided sled travel | BLP01 primary frame assembly | Integrated part of the BLP01 machine |
| Lower adjustable foot platform | Foot placement in applicable machine exercises | BLP01 fitted part; technical table lists 5 lower positions | Integrated part of the BLP01 machine |
| Upper adjustable foot platform | Foot placement or body position for alternate training mode | BLP01 fitted part; technical table lists 3 upper positions | Integrated part of the BLP01 machine |
| Back pad and shoulder cushions | Support for press and hack squat modes | BLP01 specific parts | Integrated part of the BLP01 machine |
| Three lockout safety positions | Controlled start, pause and finish points | BLP01 safety mechanism; verify stops before every set | Integrated part of the BLP01 machine |
| 13 in carriage loading bars | Accept compatible loading plates on the sled | Official plate opening specification is 2 in | Integrated part; plates sold separately |
| 7.87 in storage horns | Store plates on the frame | Check load distribution and horn capacity in manual | Integrated machine storage components |
| 170 lb Olympic plate package | Four matched plate pairs totaling 170 lb | Two each of 10, 15, 25 and 35 lb | Included only with selected 170 lb package |
| 260 lb Olympic plate package | Five matched plate pairs totaling 260 lb | Two each of 10, 15, 25, 35 and 45 lb | Included only with selected 260 lb package |
| 370 lb Olympic plate package | Six matched plate pairs totaling 370 lb | Two each of 10, 15, 25, 35, 45 and 55 lb | Included only with selected 370 lb package |
| RitFit Fleck 2 in Olympic bumper plates | Alternative plate purchase for progressive loading | Use only plates that physically fit the sleeve and observe the appropriate capacity | Sold separately; not a stated inclusion in basic BLP01 |
| RitFit interlocking rubber gym flooring | Floor surface protection and a dedicated lifting zone | Choose an installation surface suitable for the weight and contact points | Sold separately |
| RitFit PLC01 leg extension and curl machine | Add knee extension and flexion exercises | Separate equipment, not a BLP01 attachment | Included only in selected BLP01 / PLC01 duo |
| RitFit M1 PRO Smith machine | Add Smith, rack and cable training modes | Separate machine needing its own clearance and correct assembly | Included only in selected Pro Strength System bundle |
| BLP01 user manual | Assembly, adjustment, safety and maintenance procedures | Select the matching BLP01 manual and machine generation | Official manual available online |
Compatibility note: Machine parts are not advertised as universally interchangeable with GAZELLE or GAZELLE PRO components. Confirm spare part fit and any third-party plate, collar or mat compatibility before purchase.
Frequently Asked Questions About the RitFit BLP01
The answers below prioritize standalone facts so they can be understood without reading the entire guide. For assembly or loading decisions, the latest machine manual remains the operational reference.
What is the RitFit BLP01?
The RitFit BLP01 is a plate-loaded 45 degree leg press, hack squat and calf raise machine designed for home lower-body strength training. It is a dedicated lower-body unit, not a Smith machine or cable stack.
What are the three main BLP01 exercises?
The BLP01 supports leg presses, hack squats and calf raises. Foot placement and machine setup can support additional variations when the safety manual and lifter positioning allow them.
What is the RitFit BLP01 weight capacity?
RitFit states a 1,200 lb weight capacity and separately lists 572 lb overall dynamic capacity. Those values describe different rating categories and should not be treated as interchangeable exercise limits.
Does a 1,200 lb weight capacity mean I can press 1,200 lb?
No. The headline 1,200 lb manufacturer figure does not override the separately published 572 lb dynamic rating or any more restrictive training, mechanical or safety limit in the manual.
What is the BLP01 unloaded starting resistance?
The official specification lists 55 lb as unloaded pull force. That does not mean the sled itself weighs 55 lb or that every user experiences identical resistance at each joint angle.
How large is the RitFit BLP01?
The published overall machine dimensions are 75.6 in long, 40.6 in wide and 55.9 in high, and RitFit lists a footprint of 20.3 sq ft. Allow additional room to load plates and safely enter and exit the machine.
Why does the published BLP01 footprint differ from length times width?
The listed 20.3 sq ft figure is slightly smaller than the approximately 21.3 sq ft rectangle calculated from 75.6 by 40.6 in overall dimensions. RitFit does not explain the measurement basis in the cited technical table, so use overall dimensions and extra clearance to plan a room.
How much does the BLP01 machine weigh?
The BLP01 machine weight is listed as 258 lb before optional plates or packaging. Verify floor capacity and assembly access rather than relying only on the published footprint.
Does the standalone BLP01 include weight plates?
No. The machine-only configuration does not list a plate set as included, whereas full leg workout packages offer 170, 260 or 370 lb of plates. Read the selected variant and package list before checking out.
What plates are included in the BLP01 170 lb package?
The 170 lb package lists two plates each weighing 10, 15, 25 and 35 lb. Their combined weight is 170 lb, not the sled resistance automatically used for every set.
What plates are included in the BLP01 260 lb package?
The 260 lb package lists two plates each weighing 10, 15, 25, 35 and 45 lb. Actual working resistance depends on which plates are loaded, the mechanism and the exercise setup.
What plates are included in the BLP01 370 lb package?
The 370 lb package lists two plates each weighing 10, 15, 25, 35, 45 and 55 lb. Buying the package does not authorize using a load above the applicable dynamic or component rating.
Does the BLP01 use 1 inch or 2 inch weight plates?
The technical table lists a 2 in plate hole diameter, favoring compatible Olympic plates. A separate product FAQ says standard plates are also supported, so confirm the sleeve size and any adapter need before purchasing 1 in plates.
How many BLP01 footplate settings are available?
The official technical table lists five lower footplate positions and three upper footplate positions. The product FAQ reverses the upper and lower labels, so consult the current manual and inspect the adjustment mechanisms on your specific unit.
How many BLP01 safety lock positions are there?
The official BLP01 feature section lists three lockout positions. Check the stops and practice engaging them with no added plates before normal training.
What height range does the BLP01 suit?
RitFit pages give inconsistent values, including different figures for leg press and hack squat positions. Fit should be checked against the adjustable platforms, shoulder and back support, safety stops and actual joint range rather than a single height range.
Is the BLP01 a Smith machine?
No. The BLP01 is a dedicated plate-loaded leg press, hack squat and calf raise machine. The M1 PRO in the Pro Strength System bundle is a separate Smith machine.
What is included in the BLP01 and PLC01 duo?
The listed Ultimate Leg Day Duo combines a BLP01 leg press and hack squat machine with a separate PLC01 leg extension and curl machine. Weight plates are not guaranteed in the selected base package unless explicitly stated.
What is the difference between BLP01 and GAZELLE PRO?
RitFit lists the BLP01 at 1,200 lb weight capacity with a 20.3 sq ft footprint, while its GAZELLE PRO data lists a 2,000 lb static capacity and 28.93 sq ft footprint. Their frames, platforms, adjustability and dynamic load ratings differ, so compare like-for-like specifications instead of only headline capacities.
What is the current BLP01 coupon code?
No configuration-specific coupon code was verified for this article. The product pages can advertise special starting prices, but the exact selected variant, automatic discount eligibility and final cart total must be confirmed at checkout.
How is the BLP01 delivered and assembled?
The standalone BLP01 shipping panel lists three cartons, and RitFit provides a BLP01 manual through its official manuals page. Read the full assembly instructions, check all fasteners and safety parts, and arrange safe help for lifting heavy components.
How should I maintain the RitFit BLP01?
RitFit recommends inspecting bolts, connections and support pads and cleaning or lightly lubricating moving parts based on the official maintenance guidance. Follow the current BLP01 manual for any model-specific lubricant or inspection intervals.
Conclusion
The RitFit BLP01 is a dedicated 45 degree 3-in-1 lower-body machine offering leg press, hack squat and calf raise training. Buyers with compatible plates can start with the machine-only listing, while the 170, 260 and 370 lb plate packages supply distinct starting inventories. Separate PLC01 or M1 PRO combinations expand the overall gym but do not change the BLP01 into another machine type.
Compare the manufacturer specifications with the clearance and fit required for your room, then verify selected colors, package contents, loading limitations and current RitFit offers before purchasing. For final setup and safety instructions, use the official BLP01 manual.
Official Sources and Pricing Notes
Only RitFit's public product listings, model specification pages, model comparisons and official support pages were used to substantiate the product details in this article. Sources describe the values available at the reference date and do not automatically update a Shopify blog page.
- RitFit BLP01 machine page, options, FAQ and shipping
- RitFit BLP01 Pink machine and plate options
- BLP01 Full Leg Workout Package and plate breakdown
- The Ultimate Leg Day Duo BLP01 and PLC01 bundle
- RitFit Pro Strength System M1 PRO and BLP01 bundle
- BLP01 General Info technical table
- BLP01 Technical Specification and overview
- Official BLP01 and GAZELLE PRO feature comparison
- RitFit 2 in Olympic bumper plate reference
- RitFit rubber flooring product page
- Official RitFit installation guides and BLP01 manual
- Official RitFit offers page
