The RitFit M2 Knowledge Base 2026 covers the complete M2 Smith machine and modular home gym platform. Compare M2 3D, M2 Pro and M2 Pro 3D configurations, guided bar movement, dual 286 lb weight stacks, dimensions, manufacturer load ratings, cable pulley specifications, GATOR bench packages and compatible M2 accessories.
Content updated: . Listing reference reviewed: October 25, 2026. Currency: USD. Product prices and availability below describe official public listing snapshots, not checkout guarantees. Choose the exact style, color and package on the linked product page.
Quick Answer
The RitFit M2 is a modular Smith machine home gym system with a power rack, cable crossover, pull-up station and plate storage. The original basic M2 is marked no longer available; the active product listing primarily features the M2 3D with a horizontally and vertically moving Smith bar and plate-loaded cables, the M2 Pro with a fixed vertical Smith bar and two 143 lb selectorized stacks, and the M2 Pro 3D combining 3D guided movement with the same 286 lb combined stacks. RitFit publishes an 86.14 in height, 22.8 sq ft footprint and 2,000 lb frame maximum for the series. Choose the exact model by Smith bar path and cable resistance method.
Key Takeaways
- Three currently marketed machine styles: M2 3D, M2 Pro and M2 Pro 3D. The former basic M2 with standard Smith movement is marked no longer available on the M2 product page.
- Smith movement: M2 3D and M2 Pro 3D allow guided vertical and horizontal travel; M2 Pro uses a fixed vertical Smith path.
- Dual weight stacks: M2 Pro and M2 Pro 3D include two selectorized 143 lb stacks, totaling 286 lb. The M2 3D uses plate-loaded cables instead.
- Manufacturer rack dimensions: 78.7 in length including the Smith bar, 68.75 in width, and 86.14 in height. Published 22.8 sq ft footprint does not specify the same measurement boundaries as overall dimensions.
- Load ratings: The 2,000 lb maximum is a published frame category and must not be applied to individual Smith, cables or rack attachments.
- Technical source conflict: The dedicated M2 specifications page lists 14-gauge uprights while the machine and package pages list 13-gauge. The published 0.08 in wall measurement should not be used to resolve that discrepancy without manufacturer confirmation.
- Optional upgrades: WSM2 stacks are listed as an upgrade for M2 / M2 3D, whereas LEM2, LPM2, LAM2 and ASM2 have separate M2 attachment compatibility requirements.
RitFit M2 Product Configurations and Price Comparison
The M2 family differs by guided Smith travel, weight stack inclusion, color, bench package and optional Olympic plate sets. The seven-column catalog comparison below distinguishes a discontinued legacy model, machine-only listings and separately selectable GATOR home gym packages. A starting price on a product page must not be assigned to every available color and package option.
Price definitions: Compare at Price is used only for an explicitly shown comparable value and should not be assumed to be MSRP. Listed Price is the dated starting or named machine price visible on the official page; variant prices may differ. Advertised Promotional Price is only given when the source states a numeric offer for that specific selection.
Coupon Code: No manually entered coupon or automatically applied discount label was verified in checkout for the M2 configurations below. The M2 product listings mention a percentage promotion, but do not establish a separate validated dollar promotional price for each row.
On smaller screens, scroll within the table to view every column.
| Product Configuration | Compare at Price (USD) | Listed Price (USD) | Advertised Promotional Price (USD) | Coupon Code | Included Equipment | Recommended Use |
|---|---|---|---|---|---|---|
| RitFit M2 Basic Smith Machine, Legacy ConfigurationProduct page explicitly identifies original M2 with standard Smith as no longer available. | Not shown | No current listing price | Not separately verified | Not applicable | Original M2 power rack, basic guided Smith system and plate-loaded cable carriage. Historical style, not a current selectable product offer. | Reference for past owners or M2 attachment questions; do not treat as available for purchase. |
| RitFit M2 3D Smith Machine, Plate LoadedMachine page starting style; choose Black or Red using the listing selector. | Not shown | $2,199.99Public listed machine price for M2 3D; color variant not separately repriced. | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 rack with 3D guided Smith bar, plate-loaded cable crossover, pull-up bar and plate storage. A selectorized weight stack, bench and Olympic plate set are not identified as included. | Home gym owners with compatible plates who prioritize multi-directional guided bar movement. |
| RitFit M2 Pro Smith Machine with 286 lb Weight StackFixed vertical Smith system; selectorized dual weight stacks. | Not shown | $2,799.99Displayed machine configuration chart price; exact chosen color requires reconfirmation. | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 Pro rack with fixed vertical Smith bar and integrated 286 lb combined selectorized stacks (143 lb per side). No separately bundled bench or Olympic plates identified. | Shared home gym and cable users who want quick pin-selected resistance changes. |
| RitFit M2 Pro 3D Smith Machine with 286 lb Weight Stack3D Smith travel plus dual selectorized stacks. | Not shown | $3,099.99Displayed machine configuration chart price; exact chosen color requires reconfirmation. | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 Pro 3D rack with vertical and horizontal guided Smith travel, 286 lb combined stacks, dual cables, pull-up bar and rack stations. | Buyers who want both 3D guided bar movement and stack-adjusted cable exercises. |
| RitFit M2 3D Home Gym Package with GATOR BenchPackage page default selections: M2 3D, Black, Gator (Black). | Not shown | $2,499.99Starting package page listing; confirm the currently selected GATOR and color combination. | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 3D Smith machine and selected GATOR adjustable bench; no separate 260 lb or 370 lb Olympic plate add-on in the basic GATOR selection. | First full home gym setup for buyers obtaining their plates separately. |
| RitFit M2 3D with GATOR Bench and 260 lb Plate SetPackage selector includes Gator (Black)+260lb Set and Gator (Red)+260lb Set. | Not shown | Variant-specific price not verified | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 3D machine, GATOR adjustable bench and selected 260 lb Olympic weight plate package. Choose exact bench color and M2 color at checkout. | New lifters who prefer a combined rack, bench and plate purchase. |
| RitFit M2 3D with GATOR Bench and 370 lb Plate SetOfficial package selector includes 370 lb plate set options. | Not shown | Variant-specific price not verified | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 3D rack, GATOR adjustable bench and selected 370 lb Olympic plate set. Separate accessories and barbell inclusions need confirmation. | Users needing a larger plate collection for Smith, rack and plate-loaded cable work. |
| RitFit M2 Pro Home Gym Package with GATOR BenchSelect M2 Pro style and chosen GATOR color. | Not shown | Variant-specific price not verified | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 Pro with integrated 286 lb selectorized stacks plus a GATOR adjustable bench. Optional Olympic plate sets depend on package selection. | Households prioritizing selectorized cable training and an included bench. |
| RitFit M2 Pro 3D Home Gym Package with GATOR BenchSelect M2 Pro 3D style; choose the bench and plate options. | Not shown | Variant-specific price not verified | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 Pro 3D, dual 143 lb stacks and a GATOR bench; optional plates are separate selector choices. | Multi-user home gym combining 3D Smith work and selectorized cable changes. |
| RitFit M2 Pro 3D Home Gym Package with GATOR and 260 lb PlatesGator (Black)+260lb Set and Gator (Red)+260lb Set options are listed. | Not shown | Variant-specific price not verified | Not separately verified | Not verifiedConfirm the applicable promotion and final selected variant in the official cart. | M2 Pro 3D rack, 286 lb integrated weight stacks, GATOR adjustable bench and 260 lb plate set. Check barbell and attachment contents separately. | Buyers building a broad one-room strength gym with both plates and selectorized cable resistance. |
RitFit M2 Product Specifications
The M2 technical table covers the broader M2, M2 3D, M2 Pro and M2 Pro 3D platform. Movement path and stack configuration differ by model. Manufacturer static component limits are distinct from working exercise resistance and should never be treated as interchangeable.
On smaller screens, scroll within the table to view every column.
| Product Attribute | Published Value | Configuration or Measurement Notes |
|---|---|---|
| Brand | RitFit | Brand named on the official product pages. |
| Product series | M2 modular home gym / Smith machine | M2 describes a family with standard and 3D Smith bar styles. |
| Historical base model | M2 with standard Smith, no stack | Listed by the manufacturer as no longer available; not offered as a current purchase option. |
| Current machine styles | M2 3D; M2 Pro; M2 Pro 3D | The product page offers these three styles, with Black and Red listed as colors. |
| Product category | Multi-functional Smith machine with power rack and cable crossover | The included functions depend on the chosen model and accessories. |
| Rack frame material | Steel | The published upright dimensions and gauge require confirmation if exact wall thickness matters. |
| Upright outside dimensions | 2.36 × 2.36 in (60 × 60 mm) | M2 series upright section. |
| Published upright wall thickness | 0.08 in | Shown on official specifications; conflicts with the 13-gauge classification on sales pages. |
| Steel gauge discrepancy | 14 gauge on M2 Technical Specifications; 13 gauge on product pages | Do not present one gauge as independently verified for every current unit; obtain written clarification from RitFit. |
| Overall rack length including Smith bar | 78.7 in | Manufacturer length includes Smith bar; exclude no side clearance from room planning. |
| Published rack width | 68.75 in | Manufacturer overall width; clarify measured points for the exact configuration. |
| Published rack height | 86.14 in | Additional overhead clearance may be necessary for pull-ups and assembly. |
| Published floor footprint | 22.8 sq ft | Manufacturer stated footprint; measurement boundaries differ from the overall length and width; not safe working room size. |
| Maximum frame weight rating | 2,000 lb | Manufacturer maximum weight rating; not an individual cable, Smith or attachment rating. |
| Published Smith bar weight | 33 lb | Technical specifications page value; follow generation-specific manual if the supplied bar differs. |
| Standard Smith motion | Guided vertical movement | Original M2 and current M2 Pro use the basic guided Smith mechanism. |
| 3D Smith motion | Guided vertical and horizontal movement | M2 3D and M2 Pro 3D use 3D Smith bar movement; not a fully free Olympic barbell. |
| Standard Smith height positions | 11 | Manufacturer count for the basic guided Smith mechanism. |
| 3D Smith positions | 10 | Manufacturer count for the 3D Smith mechanism. |
| Cable pulley ratio | 2:1 | A change in selected stack mass is not the same as handle resistance; mechanical friction affects feel. |
| Cable adjustment positions | 16 | M2 product page describes 16 adjustment holes on the main and fly slider uprights. |
| Cable resistance type, M2 3D | Plate-loaded carriage | Olympic plates are needed to add cable resistance on the non-stack M2 3D. |
| Cable resistance type, M2 Pro | Selectorized stacks and plate-compatible carriage | Pro styles include dual weight stacks; follow manual for any additional carriage loading. |
| Cable resistance type, M2 Pro 3D | Selectorized stacks and plate-compatible carriage | 3D travel does not alter the published total weight stack mass. |
| M2 Pro combined selectorized weight | 286 lb | Two stacks with 143 lb on each side. |
| Selectorized stack each side | 143 lb | Thirteen 11 lb plates per side according to manufacturer product FAQ. |
| Selectorized weight plates per side | 13 | Published count per M2 Pro stack. |
| Selectorized weight plate increment | 11 lb | One stack plate mass; this is not the exact resistance at the 2:1 handle. |
| Single-side pulley handle static capacity | 352 lb | Static component rating; never a suggested working cable exercise load. |
| Pull-up bar capacity | 465 lb | Published manufacturer pull-up bar rating. |
| Safety arm static load capacity | 660 lb | Published safety arm rating; correct assembly and positioning remain necessary. |
| Dip bar static capacity per side | 330 lb | Rated accessory value; verify dip bars are included for the selected machine/package. |
| J-hook static capacity per side | 330 lb | Per-side manufacturer rating; not a combined whole-frame limit. |
| Plate storage horns | 6 | Manufacturer lists six weight plate storage bars. |
| Plate storage horn load | 280 lb per bar | Storage capacity category; not an exercise load rating. |
| Accessory hooks | 4 | Manufacturer describes four storage hooks; inclusion may depend on supplied equipment. |
| Upright hole size | 1 in | Attachment fit requires compatible hole spacing and actual frame geometry, not diameter alone. |
| Fly attachment hole size | 0.39 in | Separate specified hole size, not equivalent to upright accessory hole diameter. |
| Plate opening diameter | 2 in | Manufacturer plate-hole standard for Olympic plates. |
| Cable rail material | Stainless steel | Listed on dedicated manufacturer technical specifications. |
| WSM2 optional upgrade | 286 lb total, 143 lb per side | Listed for M2 / M2 3D rather than as an extra set for Pro versions. |
| WSM2 advertised plate-loaded carriage capacity | 309 lb per side | WSM2 page cites carriage capacity in combination with the weight stack; do not interpret as guaranteed hand force. |
| WSM2 advertised stacked plus carriage capacity | 452 lb per side | 143 + 309 lb as described by accessory page; use only in the correctly approved configuration. |
| Available color options on machine page | Black; Red | Actual inventory, prices and options can change. |
| GATOR package selection | Gator (Black); Gator (Red); optional 260 lb or 370 lb plate sets | Selections shown on separate M2 Series package product page. |
| Bench included with basic machine-only model | Not established | GATOR is a separately marketed bundle selection; do not presume a bench accompanies a machine-only purchase. |
| Olympic plates with machine-only configurations | Not established as included | M2 3D plate-loaded cables require compatible plates sourced separately unless chosen bundle includes them. |
| Delivery presentation | Multiple cartons; package-dependent | Official pages show differing cartons by model and package; check selected shipping instructions. |
| Assembly requirements | Model-specific official manual | Do not assume standard Smith and 3D Smith components or assembly steps are identical. |
| Minimum recommended room size | No universal minimum verified | Leave clearance for pull-ups, Smith travel, bench positioning, cables and loading plates. |
Specification source caution: The dedicated M2 Technical Specifications page names 14-gauge 2.36 × 2.36 × 0.08 in uprights, while the current M2 sales pages describe 13-gauge with the same wall thickness. This article keeps that conflict visible rather than choosing one figure. The reported 22.8 sq ft footprint also does not follow directly from multiplying the published overall dimensions, which include the Smith bar; confirm room measurements independently.
Recommended Users and Use Cases for the RitFit M2
Choose the M2 model according to your guided Smith movement preferences, available Olympic plates, number of household users and intended upgrades. Recommendations below are editorial use cases based on the published configurations, not claims of universal ergonomic or medical suitability.
On smaller screens, scroll within the table to view every column.
| User Profile | Training Goals | Training Environment | Selection Considerations | Recommended Configuration |
|---|---|---|---|---|
| Beginner buying a first Smith machine | Learn guided squats, presses and cable patterns | Dedicated spare room or garage | Understand the different 3D Smith path; set safeties and begin with manageable weight. | M2 3D plus GATOR bench package |
| Owns Olympic plates already | Guided free-movement variants and plate-loaded cable exercises | Existing home or garage gym | M2 3D does not include built-in selectorized stacks; compare existing plate supply. | M2 3D machine only |
| Two or more household users | Quickly change cable resistance between users | Shared training space | Pin-selected stacks simplify transitions but count and pulley ratio differ from hand resistance. | M2 Pro or M2 Pro 3D |
| Prefers fixed bar travel | Standard vertical Smith squat and press setup | Home gym with repeatable station layout | M2 Pro is the current fixed-path Smith style; basic original M2 is marked discontinued. | M2 Pro |
| Wants multidirectional Smith movement | Guided bar travel in both horizontal and vertical directions | Dedicated gym with safe clearance | 3D travel differs from free barbell movement and requires technique familiarization. | M2 3D or M2 Pro 3D |
| Wants both plate and selectorized training | Switch between Smith, free rack, cables and accessories | Full strength-training room | The weight stack supplies cable resistance; free-weight work may still require plates and a compatible barbell. | M2 Pro 3D with GATOR and plates |
| Prioritizes quadriceps isolation | Add cable-connected seated leg extensions | Modular rack setup | Check LEM2 compatibility with precise upright geometry and cable arrangement. | M2 platform with verified LEM2 fit |
| Focuses on rows and lat pulldowns | High row, pulldown and adjustable seating | Home gym with cable clearance | LPM2 or ASM2 additions require model-specific fit checks and separate load limits. | M2 Pro plus verified M2 attachments |
| Under very low ceilings | Cannot clear installed rack and exercise overhead | Low-basement room | 86.14 in frame height alone does not include pull-up and installation space. | Verify room clearance before buying any M2 variant |
RitFit M2 Exercises and Primary Muscle Groups
The M2 platform supports Smith movements, rack lifts, cable exercises, pull-ups and optional accessory work. Training possibilities depend on your selected Smith movement type, plate or stack resistance, suitable handles, a bench, free-weight equipment and correct safety setup. Muscle group descriptions identify typical contributors, not guaranteed individual outcomes.
On smaller screens, scroll within the table to view every column.
| Exercise | Primary Muscle Groups | Required Equipment | Configuration Requirements |
|---|---|---|---|
| Smith squat | Quadriceps, glutes, adductors and trunk stabilizers | Guided Smith bar, plates and appropriate safety stops | Basic vertical Smith on M2 Pro or 3D guided Smith on M2 3D / Pro 3D; movement feel differs. |
| Smith bench press | Chest, anterior deltoids and triceps | Guided Smith bar, compatible adjustable bench and plates | Bench included only in selected GATOR packages or purchased separately. |
| Smith Romanian deadlift | Hamstrings, glutes and spinal erectors | Guided Smith bar and appropriate plates | All selected Smith-equipped styles, with path-specific technique and floor clearance. |
| Smith split squat | Quadriceps, glutes and adductors | Smith bar, safe foot stance and plates if needed | Use the chosen Smith movement path and appropriate load or safety position. |
| 3D Smith horizontal travel drill | Chest, back or leg muscles depending on exercise | 3D Smith mechanism with correctly loaded bar | Only M2 3D and M2 Pro 3D; this is guided motion, not free barbell movement. |
| Free Olympic barbell squat | Quadriceps, glutes and trunk stabilizers | Power rack, separate Olympic barbell, plates and J-hooks | Confirm compatible free bar and selected package contents. |
| Cable chest fly | Pectoralis major and anterior deltoids | Dual adjustable cables with handles | Plate loaded on M2 3D; selectorized stacks in M2 Pro variants. |
| Standing cable row | Latissimus dorsi, rhomboids, biceps | Cable system with suitable attachment | All cable-equipped styles with configured resistance and correct cable line. |
| Lat pulldown | Latissimus dorsi, teres major and biceps | High pulley, suitable bar and leg stabilization | LPM2 and ASM2 may expand the setup; confirm accessories rather than presuming inclusion. |
| Cable triceps pushdown | Triceps brachii | Adjustable high cable and rope or handle | All M2 cable configurations when equipped with correct handles. |
| Cable biceps curl | Biceps and brachialis | Low cable and straight or rope handle | All cable configurations; resistance source differs by model. |
| Cable lateral raise | Middle deltoid | Low cable and single hand grip | All cable configurations with comfortable cable height. |
| Cable face pull | Posterior deltoid and scapular stabilizers | Adjustable cable and rope handle | All cable configurations with correct anchor height. |
| Pull-up or chin-up | Latissimus dorsi, biceps and upper back | Integrated pull-up bar | Observe published 465 lb bar rating and overhead clearance. |
| Parallel-bar dip | Triceps and chest | Properly compatible dip attachment | Verify attachment inclusion and per-side load rating before training. |
| Single-arm lever press or row | Chest, back or shoulders depending on variation | Optional LAM2 adjustable lever arm | Only after mechanical fit has been confirmed; separate LAM2 rating applies. |
| Seated leg extension | Quadriceps | Optional LEM2 cable-connected leg extension module | Confirm LEM2 compatibility, user fit and attachment rating; not a built-in base station. |
| Nordic curl setup or seated leg hold | Hamstrings or trunk depending on movement | Optional ASM2 adjustable leg holder and seat | Only with correct ASM2 installation and positioning. |
| High cable row | Upper back, lats and elbow flexors | Optional LPM2 high row pulley attachment | LPM2 is a separate M2 attachment with its own 240 lb listed capacity. |
RitFit M2 Included Components and Compatible Accessories
Machine assemblies and separately purchased attachments must be distinguished. The manufacturer names several M2-specific add-ons, but an accessory labeled for M2 does not automatically prove universal fit across older production generations or independently changed upright hardware. Confirm hole diameter, spacing, cable routing, clearances and the selected product manual before ordering.
On smaller screens, scroll within the table to view every column.
| Accessory Product or Component | Training Function | Compatible Model and Fit Requirements | Included or Sold Separately |
|---|---|---|---|
| M2 power rack / cage frame | Supports rack training and integrated Smith stations | M2 family; use correct supplied structural and safety components. | Integrated machine component |
| Basic guided Smith bar mechanism | Provides fixed vertical guided training path | Current M2 Pro; legacy base M2 was originally offered but is now marked unavailable. | Included only in fixed-path Smith style |
| 3D Smith bar mechanism | Permits guided horizontal and vertical bar travel | Current M2 3D and M2 Pro 3D; not interchangeable by assumption. | Included only with 3D Smith models |
| Dual cable crossover with adjustable sliders | Supports cable flys, rows, pulldowns and arm training | M2 family, using plate-loaded or selectorized resistance by style. | Integrated machine component |
| Integrated dual 143 lb selectorized stacks | Allow pin-selected cable resistance changes | M2 Pro and M2 Pro 3D; 286 lb combined stacks. | Included in Pro stack configurations |
| Six plate storage horns | Stores compatible Olympic plates | Six horns on M2 family, 280 lb per published horn rating. | Manufacturer listed integrated storage |
| Pull-up bar and J-hook / safety stations | Pull-up and free barbell rack functions | Equipment setup and applicable load ratings must be checked. | Integrated or supplied by selected machine assembly; inspect packing list |
| RitFit WSM2 286 lb Weight Stack Set | Converts or upgrades compatible plate-loaded M2 cable resistance to selectorized stacks | Official listing names M2 / M2 3D; do not assume stacking a second set onto M2 Pro. | $1,159.99 listed; optional accessory |
| RitFit LEM2 Leg Extension Rack Attachment | Seated cable leg extensions; manufacturer also mentions pulldown and supported row uses | Listed for 60 × 60 mm M2-compatible uprights; confirm exact configuration, cable fit and module ratings. | $319.99 listed; optional accessory |
| RitFit LPM2 High Row and Pulldown Attachment | Raises cable line for high rows and lat pulldowns | M2 only per listing; published accessory load capacity 240 lb. | $69.99 listed; optional accessory |
| RitFit LAM2 Adjustable Lever Arm Attachment | Plate-loaded lever presses, rows and arm work | M2 only per listing; published load limit 150 lb per arm. | $259.99 listed; optional accessory |
| RitFit ASM2 Adjustable Leg Hold-Down with Seat | Holds legs for cable work and supports seated or chest-supported training | Stated for 60 × 60 × 1.8 mm uprights with 1 in holes; verify M2 variant clearance. | $139.99 listed; optional accessory |
| GATOR adjustable bench | Supports bench pressing, seated lifts and accessory sessions | Included only in named M2 Series GATOR home gym bundle selections. | Bundle component or separate bench purchase |
| 260 lb Olympic weight plate package | Loads Smith bar, free bar or plate carriage as required | Optional package selector; proper Olympic plate opening and loading required. | Only with selected 260 lb package |
| 370 lb Olympic weight plate package | Supplies a larger set of plates for Smith and rack training | Optional package selector; check total floor loading and unloading clearance. | Only with selected 370 lb package |
| Olympic barbell for free-weight work | Independent free-bar rack squats, presses and pulls | Check model-specific package contents; Smith bar is not the same as an independent barbell. | Separate unless selected packing list explicitly includes it |
Attachment pricing is a public snapshot only, not a verified active offer; some official pages simultaneously display Sold Out and add-to-cart controls. LEM2, LPM2, LAM2, ASM2 and WSM2 are not shown as included in the base M2 machine. All attachments have separate load ratings and model-specific installation instructions.
Frequently Asked Questions About the RitFit M2
What is the RitFit M2?
The RitFit M2 is a modular Smith machine and power rack family that combines guided bar training, cable crossover and pull-up functions. The current page mainly offers M2 3D, M2 Pro and M2 Pro 3D configurations.
Is the original RitFit M2 still available?
The official M2 product page identifies the original basic M2 configuration as no longer available. Check the current listing for M2 3D, M2 Pro and M2 Pro 3D instead.
What is the difference between M2 3D and M2 Pro?
M2 3D provides guided Smith movement in vertical and horizontal directions with plate-loaded cables. M2 Pro instead uses a fixed vertical Smith bar and includes dual selectorized weight stacks.
What is the difference between M2 Pro and M2 Pro 3D?
Both M2 Pro models include two 143 lb cable weight stacks. M2 Pro has fixed vertical Smith travel, while M2 Pro 3D provides guided vertical and horizontal Smith travel.
Is the RitFit M2 a 3D Smith machine?
Not every M2 style is a 3D Smith machine. M2 3D and M2 Pro 3D have guided 3D travel, whereas M2 Pro has a fixed vertical Smith path.
Does the M2 3D include a weight stack?
The M2 3D machine listing uses a plate-loaded cable system rather than an included selectorized stack. A compatible WSM2 286 lb upgrade is listed separately.
How much weight is in the M2 Pro weight stacks?
M2 Pro and M2 Pro 3D each include 286 lb of total selectorized weight, split into 143 lb on each side. The manufacturer describes thirteen 11 lb plates per side.
What is the pulley ratio on the RitFit M2?
The M2 series lists a standard 2:1 cable pulley ratio. Stack mass is not directly equal to resistance felt at the handle.
Does the M2 3D need Olympic weight plates?
Yes, the plate-loaded cable carriage needs compatible weight plates to provide added cable resistance. Check whether a selected machine package includes a plate set before ordering.
How much floor space does the M2 require?
RitFit publishes a 22.8 sq ft equipment footprint, not a guaranteed minimum training room. The published overall length and width include parts such as the Smith bar, so measure and allow additional working clearance.
What are the RitFit M2 dimensions?
The manufacturer lists the M2 as 78.7 in long including the Smith bar, 68.75 in wide and 86.14 in high. Check ceiling height, door access and space for all exercises before assembly.
What is the maximum weight capacity of the M2?
RitFit states a 2,000 lb maximum weight rating for the rack frame. The pulley handles, pull-up bar, J-hooks, safety arms and optional accessories have their own lower component ratings.
Are the M2 uprights 13 gauge or 14 gauge?
RitFit pages disagree on upright gauge: the dedicated technical specifications page says 14 gauge, while the machine sales page says 13 gauge. Both display a 0.08 in wall thickness, so request confirmation for the exact unit if this detail matters.
How heavy is the M2 Smith bar?
The dedicated M2 Technical Specifications page lists the Smith bar at 33 lb. Confirm the bar weight in the manual for the specific model generation used.
How many Smith bar positions are available?
The manufacturer lists 11 positions for the standard Smith system and 10 for the 3D Smith system. The applicable count depends on the model selected.
Can I use free weights with the RitFit M2?
The M2 frame includes rack functions for compatible free-weight training. A separate Olympic barbell and plates may be required because the integrated Smith bar is not a free Olympic bar.
Does the M2 include a bench?
A bench should not be assumed in machine-only configurations. The M2 Series Home Gym Package provides selectable GATOR bench combinations, with optional plate packages.
What plate package sizes are listed for M2 bundles?
The official M2 Series package selector includes options with a 260 lb or 370 lb Olympic plate set, alongside GATOR bench color selections. Exact package prices depend on the variant chosen.
What is the RitFit WSM2 weight stack upgrade?
WSM2 is a separate 286 lb combined weight stack upgrade marketed for M2 and M2 3D. M2 Pro and M2 Pro 3D already have their own integrated dual selectorized stacks.
Can the M2 use the LEM2 leg extension attachment?
The LEM2 product listing identifies M2 and 60 × 60 mm compatible uprights for its cable-connected leg extension module. Verify hole spacing, connection and exact model compatibility before purchasing.
What does the LPM2 attachment add to the M2?
LPM2 adds a high row and lat pulldown connection point for the M2 platform. Its manufacturer-listed 240 lb attachment rating is independent of the M2 frame maximum.
Are M2 accessories compatible with M1 PRO?
M2-specific attachments should not be assumed compatible with the M1 PRO. The frames differ in upright dimensions, and each accessory requires verification of hole, mounting and cable fit.
Can I add lever arms to the M2?
RitFit lists the LAM2 adjustable lever arm attachment for M2 models, with a published 150 lb capacity per arm. Confirm the actual upright and hole fit before ordering.
Can the M2 be used for leg extension exercises?
The base M2 does not list a built-in seated leg extension machine. The optional LEM2 attachment adds cable-connected seated leg extensions when installed on a compatible M2.
What is the best M2 for a shared family gym?
M2 Pro or M2 Pro 3D is useful for shared cable routines because the dual selectorized stacks allow quick resistance changes. The choice between them depends on whether you want fixed or 3D guided Smith travel.
How do I confirm M2 coupon codes and promotional prices?
Check the official product page and your selected Shopify cart for the current offer. The percentage promotion shown on the M2 listings is not evidence that a specific manual coupon or advertised price works for every variant.
Where can I find the RitFit M2 assembly manual?
Use RitFit’s official installation guide page to find M2 3D, M2 Pro and M2 Pro 3D manuals. Follow the manual for the exact guided Smith configuration and included hardware.
Conclusion
Choose an M2 configuration based on two separate features: guided Smith bar path and cable loading method. M2 3D is the plate-loaded option with guided horizontal and vertical Smith travel; M2 Pro provides selectorized cable resistance with a fixed vertical Smith system; M2 Pro 3D combines those two upgrades. The original basic M2 is listed as no longer available. Select a GATOR bench and compatible plate package only if your planned exercises require them.
Before purchasing, confirm machine dimensions, the 13- versus 14-gauge conflict, attachment compatibility and live price for your exact model. Review current RitFit offers and the official machine or bundle selectors rather than relying on this dated price reference.
Official Sources and Pricing Notes
The following official RitFit product, specification, accessory and installation pages support the model definitions and reported reference values. All prices are static observations that may not match an active variant, current stock status or checkout offer. This page has not independently tested the machines or their stated load ratings.
- RitFit M2 Machine Series: Styles, product details and comparison chart
- RitFit M2 Series Modular Home Gym Package: GATOR and plate selections
- M2 Technical Specifications: dimensions, frame ratings, gauge information
- WSM2 Weight Stack Set 286 lb for M2 / M2 3D
- LEM2 Leg Extension Rack Attachment
- LPM2 High Row and Pulldown Attachment
- LAM2 Lever Arm Attachment
- ASM2 Adjustable Leg Hold Down Attachment with Seat
- RitFit Rack Attachments Collection
- Official RitFit Installation Manuals and Setup Guides
- RitFit Current Promotions and Offers
