A smith machine and leg press package is the fastest way to cover both upper and lower body training in a single order, and the RitFit Pro Strength System does it for $1,699.99 after an automatic checkout discount. You get the M1 Pro smith machine with a dual-rail cable crossover plus the BLP01 45-degree leg press and hack squat machine.
This guide breaks down what the two machines cover, how much space they need, and who should buy the bundle instead of a single machine. Prices and specs come from the official product pages, verified in September 2026.
Quick Answer: The best smith machine and leg press package under $2,000 in 2026 is the RitFit Pro Strength System, an M1 Pro smith machine with cable crossover bundled with the BLP01 leg press and hack squat machine for $1,699.99 after an automatic checkout discount. That leaves about $300 of a $2,000 budget for plates or a bench.
Key Takeaways
- Package price: The RitFit Pro Strength System lists at $1,849.99 and currently checks out at $1,699.99, leaving about $300 of a $2,000 budget for plates or a bench.
- Coverage: The M1 Pro handles smith squats, presses, rows, cable crossover work, and pull-ups, while the BLP01 covers leg press, hack squat, reverse hack squat, and calf raises.
- Capacity: The M1 Pro frame is rated for 1,600 lbs and the BLP01 sled for 1,200 lbs, backed by a 3-year frame and welding warranty.
- Space: Plan for about 41 square feet combined plus an 8 foot ceiling for the 85.3 inch tall rack.
- Best fit: Lifters building a fully machine based home gym in one order get the most value, while owners of an existing rack can add the BLP01 on its own.
Why One Machine Rarely Covers Both Upper and Lower Body
A single smith machine covers presses, rows, and squats, but a fixed bar path cannot replace the seated leg press and hack squat arcs a dedicated sled provides. That gap is exactly why pairing the two stations has become a popular route for garage gym builders. One order covers the push and pull patterns of the upper body plus the sled-based patterns of leg day.
The smith side handles the work most lifters buy first. Its guided bar keeps bench pressing, overhead pressing, and squatting inside a controlled path, and the cable crossover adds lat pulldowns, rows, and triceps work without a second station.
Leg training is where single machine setups run out of options. Barbell and smith squats train the same general squat pattern, while a 45-degree sled opens leg press, hack squat, and calf raise arcs that a barbell cannot replicate safely at heavy loads.
- Upper body push and pull: the smith station and cable crossover cover pressing, rows, and pull-ups.
- Machine based leg work: a dedicated sled covers leg press, hack squat, reverse hack squat, and calf raises.
- One footprint, one order: both machines arrive in six boxes from a single checkout instead of two separate purchases.
If you are still weighing which station matters more for your goals, our leg press vs smith machine comparison breaks down the training differences movement by movement.
What the RitFit Pro Strength System Includes
The RitFit Pro Strength System bundles the M1 Pro smith machine with cable crossover and the BLP01 leg press and hack squat machine for $1,699.99 at checkout. The listing shows $1,849.99 as the current list price against a compare-at price of $1,899.99, so the automatic discount saves $150 before the machines even ship. Every order includes the RitFit Pro Strength System bundle in six boxes, usually shipped within 2-3 business days.
Free shipping in the continental United States, a 35-day return window, and lifetime support round out the order terms. Nine color combinations are available, pairing the M1 Pro in black, red, or pink with the BLP01 in black, red, or pink.
If a matching aesthetic matters in your space, the pink version of the same bundle is listed as its own product with the same two machines.
| Machine | Weight rating | Footprint | Height | Key adjustments |
|---|---|---|---|---|
| M1 Pro smith machine with cable crossover | 1,600 lb frame, 352 lb smith carriage | 20.9 sq ft | 85.3 in | 11 smith height settings, 15 cable positions, 2:1 pulley ratio |
| BLP01 45-degree leg press and hack squat | 1,200 lb sled | 20.3 sq ft | 55.9 in | 3 lockout positions, 5 lower and 3 upper footplate positions |
Source: official RitFit product pages, verified September 2026.
"Packages arrived within 4 days of ordering, very well packaged and boxes to protect during shipping. Instructions were very clear and well laid out. Putting the set together was very easy and quality control was very good as haven't had any defects."
Stephen R. Verified Buyer, RitFit Pro Strength System
M1 PRO Smith Machine and Cable Crossover Features
The M1 Pro gives you a 1,600 lb rated frame, a linear bearing smith bar, a 15 position dual-rail cable crossover, and a multi-grip pull-up bar. Together those stations turn one half of the package into a complete upper body and squat setup. The 2 by 2 inch 14-gauge steel uprights carry the load ratings below, and the whole rack weighs 339 lbs.
Smith Bar and Safety System
The smith carriage is rated at 352 lbs with the bar itself weighing about 33 lbs, and the linear bearing system keeps the bar path centered through 11 height settings. Single-side J-hooks hold 287 lbs, the safety arms carry 575 lbs, and 12 one inch holes per side let you fine tune J-hook and safety arm placement in 4.33 inch steps.
Dual-Rail Cable Crossover and Pull-Up Bar
The dual stainless steel rail cable system offers 15 adjustable positions with a 2:1 pulley ratio and a 420 lb single-side pulley load capacity for crossovers, pressdowns, and rows. The 1.1 inch pull-up bar has a 2.36 inch upward bend with a 465 lb capacity and 82.8 inches of ground clearance, and six plate storage bars hold up to 280 lbs each.
In practice, one wall handles bench and overhead pressing inside a fixed path, lat and row work on the cables, and pull-ups, while the storage bars keep plates off the floor. If you train alone, the safety arms and spring-back protection catch the bar when a rep fails, which is the core case for a smith machine over a bare rack.
Within the RitFit line, the M1 Pro sits between the lighter M1 and the modular M2. Our RitFit M1 vs M2 smith machine comparison covers the differences if you are deciding across models.
"Few pieces of equipment in the home exercise industry are as comprehensive and versatile as this all-in-one gym system. The robust system provides a natural, centered bar path for compound lifts like squats, presses, and rows, and incorporates a dual cable crossover station with a full rack of precision-engineered attachments."
Tom Eskey, CF-L1, CPT, Home Gym Equipment Reviewer at Garage Gym Revisited, RitFit M1 Multi-functional Smith Machine Review
"I bought the bundle with the M1 Pro and the leg press machine. I am so glad to have a home gym in my basement where I can go and workout and not have to worry about going all the way to a gym"
Russell M. Verified Buyer, RitFit Pro Strength System
What the BLP01 Adds to Leg Training
The BLP01 adds a 45-degree, 1,200 lb rated sled that covers leg press, hack squat, reverse hack squat, and calf raises, the movements a smith bar cannot replicate. The RitFit BLP01 leg press and hack squat machine is the same unit RitFit sells on its own, which is what makes the bundle a genuine two machine setup rather than one machine with attachments.
The linear bearing slide runs through a 33.43 inch range of motion with three lockout positions, and the footplates adjust through five lower and three upper positions to dial in leg press and hack squat angles. Lifters from about 4.10 to 6.4 feet tall fit the leg press position, and hack squat mode suits lifters from about 5.8 to 6.4 feet.
Four Movements on One Sled
Loading plates straight onto the 2 inch storage bars, you can run leg press for quad and glute volume, hack squats for a fixed arc with less lower back demand, reverse hack squats for posterior chain bias, and standing calf raises off the footplate. That spread is what turns leg day into machine work you can keep progressing for years.
For a deeper look at the standalone machine, our BLP01 single machine buying guide covers it as a solo purchase.
"Great hack squat so far, I havent tried leg press yet but im sure it'll be smooth like the squat. Worth every penny so far."
Garrett M. Verified Buyer, RitFit BLP01 3-in-1 Leg Press and Hack Squat Machine
Sample Training Split for the Two Machines
A simple split runs upper push, upper pull, and legs, with the smith station covering the first two days and the BLP01 owning leg day. Rest days slot in between based on how quickly you recover. The split below assumes three training days per week with one optional fourth session.
- Day 1, upper push: smith bench press and incline press, plus cable crossovers and triceps pushdowns.
- Day 2, upper pull: lat pulldowns and cable rows on the crossover, plus pull-ups on the multi-grip bar.
- Day 3, legs: leg press and hack squat on the BLP01, smith squats for variety, and standing calf raises off the footplate.
- Optional day 4: lighter full body work on both machines, or a recovery day if the week feels heavy.
Rep ranges stay simple: 3 to 5 sets of 5 to 8 reps on the smith compound lifts, and 3 sets of 8 to 15 reps on leg press and hack squat work. Progressive overload comes from adding small plate increments each week, and the 2:1 pulley ratio keeps cable jumps in manageable steps.
The official RitFit upper body workout below shows how the smith station covers pressing and pulling on a comparable all-in-one machine.
Does the RitFit Pro Strength System Fit a Small Garage?
The package fits a typical single car garage bay, since the two footprints add up to about 41 square feet under an 8 foot ceiling. The M1 Pro needs the larger share of that space. Its rack stands 85.3 inches tall, runs 79.1 inches long, and spans 68.1 inches wide on a 20.9 square foot footprint.
RitFit recommends a ceiling of at least 8 feet with 1 to 2 feet of clearance around the rack. The BLP01 is the easier half to place, standing 55.9 inches tall with a 40.6 inch overall width on a 20.3 square foot footprint.
Measure your wall length against both machines before ordering, and leave walking room between the sled and the rack. A basement works too, as long as the ceiling clears the 85.3 inch rack height and you have a clear path for six boxes on delivery day.
Who Should Buy the Pro Strength System, and Who Should Skip It
The Pro Strength System fits lifters who want a machine based gym in one order, while current rack owners get more value adding the BLP01 alone. The matrix below stays inside the RitFit product line, since every path it compares is a RitFit setup. Match your situation to the row that describes it, then check the linked guide before deciding.
| If you are | Better pick | Why |
|---|---|---|
| Building a full machine gym in one order | Pro Strength System package at $1,699.99 | Both machines arrive together and cover upper and lower body training from day one. |
| Already owning a rack or smith machine | BLP01 alone at $799.99 list | Adds dedicated leg press, hack squat, and calf raise work without replacing your current setup. |
| Targeting a spend closer to $1,000 | One machine now | The best smith machine under $1,000 guide covers the single machine path, and you add the second machine later. |
| Focused on leg day only | Leg press and leg extension bundle | A narrower under $1,000 leg day pairing that skips the smith station. |
| Wanting selectorized weight stack training | Smith machine weight stack package | The 264 lb WSM1 stack replaces plate loading on cable work at a higher price tier. |
Comparison limited to the RitFit product line. Prices verified on official product pages, September 2026.
None of these paths requires leaving the RitFit line. If you want to see every option in one place first, the full RitFit smith machine collection lays out the whole range.
How the Package Price Compares to Buying Each Machine Separately
Buying the bundle is cheaper than buying the machines one at a time, because the $1,849.99 list price already includes the leg press. The current automatic discount takes another $150 off at checkout, bringing the two machine order to $1,699.99. Buying the same coverage separately means two orders, two shipping windows, and a higher combined total.
The BLP01 alone lists at $799.99 on its own product page. Subtract that from the package list price and the M1 Pro smith machine with cable crossover effectively costs around $1,050, which is the clearest way to judge what the bundle actually saves.
Verified buyers back the value case, calling the package a great investment and reporting smooth cable action, clear assembly instructions, and a home gym that finally feels complete. Skip the bundle only if your space or training plan genuinely needs one machine, and put the difference toward plates and a bench instead.
Long Term Upgrades, Warranty, and Expansion Options
The package expands without replacing either machine, because the M1 Pro accepts the WSM1 weight stack set and a list of rack attachments while the BLP01 scales with plates alone. That expansion path is the main reason the bundle beats a cheaper single machine over a multi year horizon. Each add-on below is listed as compatible on the official package page.
The WSM1 weight stack set adds 264 lbs of selectorized resistance to the cable system, which removes plate swapping on pulldown and pushdown days. The page also lists the AT03 belt squat attachment, the AT02A hack squat rack attachment, and the AT04 foot plate as compatible add-ons.
Warranty coverage matters more than any single add-on. RitFit covers the frame and welding for 3 years, bolts and pulleys for 1 year, and rates the machines for home and light commercial use, so the bundle is built as a long term setup rather than a starter purchase.
FAQs About Smith Machine and Leg Press Packages
Does the smith machine and leg press package really cost under $2000?
Yes. The RitFit Pro Strength System lists at $1,849.99 with a compare-at price of $1,899.99, and a current automatic discount brings the checkout price to $1,699.99. The price applies to all nine color combinations of the M1 Pro and BLP01, so the complete two machine setup lands about $300 under the $2,000 mark with room left for plates or a bench.
How much weight can the M1 Pro and BLP01 handle?
The M1 Pro frame is rated for 1,600 lbs, with the smith carriage rated at 352 lbs and the bar itself weighing about 33 lbs. Single side J-hooks hold 287 lbs, the safety arms carry 575 lbs, and the pull-up bar is rated for 465 lbs. The BLP01 sled is rated for 1,200 lbs across leg press, hack squat, and calf raise work.
How much space do the two machines need?
The M1 Pro measures 85.3 inches tall, 79.1 inches long, and 68.1 inches wide with a 20.9 square foot footprint, so RitFit recommends a ceiling of at least 8 feet. The BLP01 stands 55.9 inches tall with a 20.3 square foot footprint. Placed side by side the pair needs roughly 41 square feet plus walking room.
Is the package cheaper than buying the machines separately?
Yes, buying together works out cheaper than adding machines one at a time. The package lists at $1,849.99 and currently checks out at $1,699.99. The BLP01 alone carries a $799.99 list price on its own product page, so bundling prices the M1 Pro smith machine with cable crossover at roughly $1,050 at list pricing.
What warranty covers the package?
RitFit covers the package with a 3-year warranty on the frame and welding and a 1-year warranty on bolts and pulleys, and the machines are rated for home and light commercial use. The order also includes free shipping in the continental United States, a 35-day return window, and lifetime support. Returns and support terms are listed on the product page.
Can you add a weight stack to the M1 Pro later?
Yes. The M1 Pro supports the WSM1 weight stack set, which adds 264 lbs of selectorized resistance to the cable system, and the package page also lists the AT03, AT02A, and AT04 rack attachments as compatible add-ons. Plates load directly onto the BLP01 with standard 2 inch holes, so leg day scales without buying another machine.
Conclusion
The RitFit Pro Strength System is the strongest smith machine and leg press package under $2,000 because it turns one order into a complete machine based gym, covering presses, rows, cable work, squats, leg presses, and calf raises in about 41 square feet. At $1,699.99 it leaves about $300 of a $2,000 budget for plates or a bench, and the 3-year frame warranty makes it a long term setup for lifters who want every station covered.
Check current offers in the RitFit discount guide before ordering, then measure your ceiling and floor space to confirm the layout.
Disclaimer
This guide is for general fitness information only and does not provide medical, rehabilitation, or professional training advice. Consult a qualified professional before starting a new training program, especially with existing injuries or health conditions.
