Mustang Pro Estimated Shipping Schedule: Red Mustang Pro: Estimated to ship in mid-November. We’re doing our best to ship your order as soon as possible. Thank you for your patience!
RitFit MUSTANG PRO Leg Extension & Curl MachineBlack
The Mustang PRO's innovative adjustable load-ratio system offers four distinct resistance settings, ranging from lighter to heavier (0.8×, 1.05×, 1.15×, 1.3×). Simply pull the pin to instantly dial in the challenge, with all four settings switching smoothly in seconds while you remain seated and without unloading plates. This gives lifters of all levels the ability to fine-tune every set, push past plateaus, make steady progress, and easily reduce resistance for true within-set failure training.
All-in-One Quad & Hamstring Station
Train both leg extensions and lying leg curls on a single, space-efficient machine. A simple pull-pin lets you switch between quad and hamstring modes in seconds, making it easy to run supersets, save space, and get more done in less time, all without changing equipment. Every movement also supports single-leg training, so you can isolate each side and help correct muscle imbalances.
Premium Comfort for Every Set
Extra-wide 2.36 inches thick seat and back pads, paired with large 4.80 inches diameter foam rollers, distribute pressure evenly so heavy sets stay comfortable and secure. Upgraded rubber grips, smooth cable travel, and band-peg compatibility complete the premium training experience.
400 lb Capacity & Rock-Solid X-Frame Stability
Built from heavy-duty 1.97 × 2.76 inches (50×70 mm / 14-gauge) steel tubing, the reinforced X-frame delivers exceptional rigidity and balance. The machine supports up to 400 lb of loaded weight and users up to 550 lb, providing a planted, confidence-inspiring feel that rivals commercial gym equipment.
Butter-Smooth Cable Motion
High-quality aluminum pulleys combined with multiple bearings and two linear ball-bearing guide rails create an exceptionally smooth resistance path. The result is fluid, controlled motion with minimal friction — helping protect your joints, improve control, and maintain consistent tension throughout every rep, without the dead spots and lockout drop-off that plague lever-only machines.
Ergonomic Adjustments for Any Body Size
The synchronized seat and backrest offer multiple adjustments: the first two settings optimize seated leg extensions with slightly different quad emphasis, while the third locks in a 15° incline for lying curls. This ergonomically tuned angle keeps your pelvis neutral, minimizing lower-back stress for peak hamstring isolation.
More Details
01Quiet, Home-Friendly Motion
Sealed pulleys and an optimized cable path minimize noise and vibration, making this machine ideal for garages, basements, or shared living spaces.
02Wide Stable Base for Heavy Lifts
The 48-inch-wide base and X-frame load-section keep all four feet planted under heavy loads — no sway, no creep, no rerack to recenter the bar. This is the kind of stability serious leg-day work demands when fatigue starts to bite at form.
03Premium Powder-Coated Frame
Thick-gauge steel with a durable powder-coat finish resists chips, scuffs, and rust, so your machine keeps looking new after years of sweaty workouts.
04Easy Plate Compatibility
A long weight horn fits 2-inch Olympic plates with room to grow. You simply slide on more weight as your legs get stronger.
05Comfort-First Touch Points
Rounded edges, soft vinyl upholstery, and foam-wrapped contact areas reduce pinching and pressure, so you focus on muscle burn — not joint discomfort.
06Embossed Grain Pad Surface
A finely embossed grain across the textured, easy-clean vinyl upholstery gives the seat and backrest a leather-like feel — grippy under sweat and crack-resistant where smooth vinyl fails over time.
Gear Specs
General info
Max user weight
550 lb
Ideal user height
5 ft 1 in – 6 ft 5 in (1.55 – 1.95 m)
Product weight (assembled)
150 lb (68 kg)
Frame finish
Powder-coated black
Frame stability
X-frame load-bearing section + 48-inch-wide base
Handles
2 × 150 mm single-piece anti-slip rubber
Load bar
4-position pull-pin slide; 350 mm effective length; 75.3 mm position spacing
Storage post
13 in (330 mm) effective length; steel + paint
Band pegs
2 × 63 mm twist-mount A36 + electroplated zinc
Dimensions
Footprint
approx. 18.63 sq ft
Main frame tubing
1.97 × 2.76 in (50 × 70 mm) × 1.8 mm wall (14-gauge) — main; 50 × 50 × 1.5 mm wall (16-gauge) — secondary
Capacity & load
Max load capacity
400 lb
Cable & pulley system
Cam & cable system
12-position cam: A36 steel with zinc plating; aluminum pulleys; multiple bearings and two linear ball-bearing guide rails
Adjustments
Adjustable load ratio
4 positions: 0.8x / 1.05x / 1.15x / 1.3x
Backrest adjustment
3 synchronized positions (seat angle to horizontal: -18.5° / -11.2° / +15°; angle between seat and backrest pads: 95.6° / 114.6° / 146.4°)
Pads & footplates
Seat pad
17.7 (13.4) × 18.5 in [450 (340) × 470 mm]; 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over recycled bonded foam
Backrest pad
12.2 (11.0) × 24.0 in [310 (280) × 610 mm]; 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over EPE foam
Mustang Pro Estimated Shipping Schedule: Red Mustang Pro: Estimated to ship in mid-November. We’re doing our best to ship your order as soon as possible. Thank you for your patience!
It's a 2-in-1 machine designed for two primary exercises: Seated Leg Extensions (targeting quadriceps) and Lying Leg Curls (targeting hamstrings). A quick pull-pin lets you switch between modes in seconds.
The weight rod can be loaded with up to 400 lbs of weight plates. The machine itself is rated for a maximum user weight of 550 lbs, thanks to its sturdy steel X-frame construction.
Instead of just adding plates, you use a 4-position pull-pin on the weight rod. Each position offers a different load ratio (0.8x, 1.05x, 1.15x, 1.3x), effectively changing how heavy the weight plates feel. This allows for quick drop sets, or fine-tuning without changing plates.
The seat and backrest are synchronized and have 3 preset angle positions. Simply move the adjustment lever to change both simultaneously for different exercise focuses and comfort.
Absolutely. The adjustable load ratio makes it easy to start with very light effective resistance, which is perfect for users of all levels. The guided motion also ensures safe and proper form.
The Mustang PRO accepts 2-inch Olympic plates only. The 350 mm effective load-bar length, combined with the 4-position pull-pin slide mechanism, is engineered around Olympic-sized plate hubs and standard Olympic plate spacing. 1-inch standard plates are not compatible.
Among home leg machines, the load-ratio system here offers four positions ranging from 0.8x to 1.3x, versus the more common one fixed ratio or shallow three-position range found elsewhere. Pad thickness across all contact surfaces reaches 60 mm (2.36 in), which is the largest disclosed in the segment. The wide stance of the X-frame trades a larger floor footprint for greater stability under heavy loading.
Yes. The seat pad measures 17.7 (13.4) × 18.5 in [450 (340) × 470 mm], and the backrest pad measures 12.2 (11.0) × 24.0 in [310 (280) × 610 mm]. Both pads are 60 mm (2.36 in) thick with vinyl upholstery. The padded leg roller measures 20.1 in (510 mm) long and 4.80 in (122 mm) in diameter for comfortable support.
The machine is designed to accommodate users between 5 ft 1 in and 6 ft 5 in (1.55m - 1.95m). The adjustable seat and multiple pivot points ensure proper alignment for this height range.
Yes. In the leg curl position, the seat has a built-in 15 degree tilt. This forms a V shape with the back pad, helping to keep your pelvis neutral and lower back supported while pre-stretching your hamstrings.
No. The stable X-base frame and smooth aluminum cable pulley system are designed for quiet, stable, and jerk-free operation, even under heavier loads.
Assembly is straightforward using included hardware and instructions. Labeled parts and online manuals make the process easier.
Your RitFit Mustang PRO Leg Extension Curl Machine ships free in two boxes within 2-3 business days. It usually takes more times if it is on pre-order. We provide reliable U.S. home delivery with tracking for every order.
